Відео

Which Fishman preamp is that? I can't find one called "double bass preamp" from Fishman?

Thanks bro!!! 🙏

Clay hasn’t posted a video or any of his social media platforms for four years. Does anyone know if his ok?

Oh, a tuning PIG! I'm not sure I have one of those on my bass. No wonder it goes out of tune. Actually it doesn't, TBH.

I might have messed up cuz most of my strings are rounded 3-4 times through the tuning peg, is it possible to remove them and cut them a little bit shorter?

Why not just use the 410 for the small venue with the volume backed off, the 410 for the medium venue with more volume, and two 410’s for larger venues. FWIW, I acquired this 410 recently. The amp is 1000 W and is on back order till December ‘24. Hopefully that’s just a placeholder. I think the head you’re using is the 800W tube head. I’m not so sure on the tubes. Have you done a discussion on tube vs. solid state?

I have stopped playing my electric guitar and I think I’ll move on to bass . Buying one this month , this will be my first song to play for sure . I appreciate how simple you have made it to understand. I can already play it in me head .

What’s wrong with having more than three winds around the tuning peg?

I wish you would provide a practice routine for beginners at the end of this lesson...

I'm confused as my bass only has tuning pegs. No pigs.

I have a MESA 8 10’s Bass cab that has the parallel out that you mentioned and I would usually put workingman’s 410s behind the Drummer . What a great thing that MESA has included in those old cabinets, I wonder if they still do.

Dude your accent is hilarious. How many times can a guy say "pig" in one video lol

Thanks for that. Waiting on my first new set of strings:) subbed!

‘Only do a couple of turns on the truss rod’ My understanding is that you should only do about 1/8 to 1/4 of a turn.

Great explanation! Thanks

Overpriced practice amp. Not gigworthy unless you play on Senior citizens Sundays

When does the tuning pig come out? 🐖

Most amps will just burn their power supply if you push them below rated impedance. They will not just shut down! Those protections are not as common and also less efective! Just simple NEVER go below rated impedance as you can actually burn it's power supply even at half volume!

ive been playing mark bass gear for ten years i have a 800 tube head plus two 8ohmn cabs always have daisy chained cabs,even mark bass suggest this in there manual,cheers

What’s the best Mark Bass head for a Mark Bass (2) 10 cab with a Mark Bass 15 on the bottom? Both ratted at 8ohm 400w each.

these are great tabs, but do you think theres any way i can get them on paper?

I thank the bass players who publish the score ❤❤❤

People go to other video lessons, this Guy sucks!! And I don't believe that he really has students. He talks to way to much. And says almost nothing!!

Breaking a Bass String?? What do you do with your guitars!!?? Totally unnecessary video!! There are enough howto video's already. Get a job Dude!!

I agree its nice and light, but if you play in a loud band forget it. Turn it up above number 4 and the cabs cannot cope with it, sounds terrible, and mine has stopped working during a gig,twice!! So whilst they are light, and look good, the reliability isnt there and if you want power, dont believe they are 500 or 800watts.

Just bought a new one in December. Has a noisy master volume and grounding issue on clear neutrik input.

please, What does SHarp mean.?

I finally understood the 8/4 ohm cabs difference. I've watched several videos in a row from different creators and this one is only one that made sense. Thank you Clay!

Reeespect!

Cool! Thanks 😊

What’s the XLR line out good for?

I'm happy to say I didn't make any of these mistakes, and I changed my strings for the first time just earlier lol

2:28 Gotta love it when you make the worst mistake of all while trying to teach about not making Noob Mistakes. String manufacturers recommend that you put the right angle bend in the string BEFORE you cut it. That will prevent the windings from loosening.

Clean ya damn bass. I laughed out loud!

Ya think you could go faster? Ugh

I don't cut my bass strings

🎯 Key Takeaways for quick navigation: 00:00 🎸 *Introducción al mundo de amplificadores de bajo* - Explicación de la complejidad al comprar un equipo de bajo. - Dos opciones al comprar un amplificador: combos prearmados o emparejar una cabeza y un gabinete por separado. - Pros y contras de los combos, destacando la versatilidad frente al peso. 02:49 🔊 *Potencia, vatios y ohmios en amplificadores de bajo* - Diferencia entre la potencia en el cabezal del amplificador y la potencia en el gabinete. - Explicación de los vatios y su relación con la capacidad de salida del amplificador. - Introducción a la clasificación de ohmios y su importancia en la conexión de cabezales y gabinetes. 04:11 ⚡ *Impedancia: Factor crucial en la configuración del amplificador* - Analogía de la impedancia como la resistencia en un grifo de agua. - Advertencia sobre los riesgos de operar un amplificador por debajo de 4 ohmios. - Peligros de no comprender y respetar la impedancia adecuada para el amplificador y los altavoces. 06:03 🔄 *Conexión de gabinetes en configuración paralela o en serie* - Elección entre gabinetes de 8 ohmios o 4 ohmios y su impacto en la impedancia total. - Aclaración sobre no conectar gabinetes en serie para evitar la pérdida de potencia. - Recomendación de conectar gabinetes en paralelo para mantener una impedancia segura y obtener la potencia total del amplificador. 08:36 🎛️ *Configuración personalizada del equipo de bajo* - Ejemplo personal del setup de Clay con un cabezal de 800 vatios y dos gabinetes de 8 ohmios. - Desafío al emparejar gabinetes de diferentes potencias y cómo enfrentarlo. - Solución ingeniosa con un dispositivo personalizado para equilibrar la distribución de potencia entre los gabinetes. 13:56 🎵 *Conclusiones y recomendaciones finales* - Recapitulación de los conceptos clave: potencia, impedancia y conexión de gabinetes. - Consejo sobre la importancia de elegir cuidadosamente los gabinetes según las necesidades del músico. - Invitación a plantear preguntas adicionales en los comentarios y referencia a otros videos relacionados. Made with HARPA AI

Another Clay here!

Hey Clay I'm a newbie, 1st time changing strings, I have a new set with the 4th n 3rd strings having a change of diameter close to the tuners, my new strings when reaching the tuners are the fat diameter not the smaller diameter like the originals. Should I return them or can I still use them??? Thanks

Lmao bro used the On Cinema song

If you daisy chain the cab that is getting too much power would that work? I had bass rig I put together that consisted of a Peavy 18" sub cabinet, EV 15"x10" cab powered by Gallien Krueger 700rb. Ran a Fender Bassman 4x10 that I rigged to only use 2x10 and took out two speakers and the tweeter. Pretty awesome sounding but never got the chance to test the limit of the power before it was stolen. Any thoughts on the potential problems being set up this way

When you say that you are running the two speakers in parallel do you mean in two separate speakon sockets at the back of the amp , if you do a lot of amps only have one socket so what do you do then ? Sorry if I’m being thick lol

My Question that I have, I have the Peavey Mini Mega 1000WT Head, I'm about to purchase the Markbass MB58R 122 Energy 800wt 8 ohm and the MB58R 104 Pure 800wt 8 ohm. Can this setup work normally with the Mini Mega head?? Somebody told me it can. But not a professional, So I'm asking this question before purchasing.

❤❤❤❤

2:32

i found the mid a lil bit of A stretch so I used 4 on the D intsead!peace out yall! Thanks again 👍was looking around for a while, this was super easy!

thanks for this and wearing the same shirt as iam currently wearing (👻😲) this helped toward the atmos!😎haha!

No talk about nut height ? Unsubscribe

Very much appreciated, my man!

I’ve been playing bass for decades and never understood this until this fantastic video! Thanks man!